portable fire places, this one has a oven below the fire box
Multi fuel burner/heater, wood and coal (please note for coal you will need to purchase a burn plate that sits in the bottom of the fire so the air can get below and to make the bottom of the fire last longer using hot coal you can also use this for the wood to you can add to cart from the website listings fire accessories)
We may have 1 or 2 in stock just ask or else they are Made per order turn around time 1-3 weeks depending, it can vary as orders come and go but message me for accurate time.
We also do the flue kits but they are sold separately you can find them in the fires and fire accessories category, or else you can attach it to existing flues as is or any flue of the same size, or simply to use out doors.
estimated around 15-18KW Heat output
measurements: 840mm high x 350mm deep x 300mm wide
Stainless steel flue/chimney is 100mm (4") diameter and 150mm high/long included
making the unit a total of 990mm total height with standard flue
weight is 50kg
the oven size is: 210mm high x 300mm wide x 350mm deep
the door opening is: 250mm wide x 180mm high
It’s a good size to cook a roast for the hole family.
The oven works well more slower cooking then conventional ovens 1.5 to 2x longer to cook, since the heat comes naturally from above, but the up side is you can’t really burn your food, real awesome for cooking meat a bit slower
max temp I’ve reached is 240 degrees c but it would have to be cracking with hot burning wood to stay that hot
easy to keep at 150 to 200 degrees c using the door adjustment to control the oven temp, as well as by controlling the fire, once you have done a couple cooks you’ll be a master at it 👌
All Made in NZ & from Corten steel so can be left bare to rust for that patina look & last a life time, or can come painted black as you see them, still Corten steel underneath though so no worries if you scratch the paint off over time anyway
adjustable Airflow feeds from the door of the fire, via an adjustable vent, as well as using the door adjustment so you have good control over it. Even being able to starve it out within minutes if needed
Wetbacks Aka - Boiler water heaters are made from stainless steel, we have 2 sizes available, both sizes fit any of the fireplaces, just the room they take up, and KW they produce is different, check wetback-boiler listings for full details on those if required. 20mm outlets, male 1/2 BSP g1/2 thread size.
Awesome for your back yard, deck, patio, camping, tiny homes, man caves & sheds, even camper vans or boats, anywhere they can fit basically.
They do not get hot down the bottom so are perfectly safe to have on wooden decks etc.
Only @benjinnering to order yours
Give me a message on here or
Call or txt me on: 0272374532
These fires are classed as un tested appliances and therefore are made for places that don't require a permit they are not un tested or un safe, just untested by the official labs (emissions testing) they may still be able to get permitted depending on your councils rules, they are classed as multi fuel heaters so are excluded from the emissions act, but also can be classed as just a wood burner, but as a multi fuel heater they only need to meet building code for permitted installations as per code, but check with your council for there rules as they can differ, but since they are classed as a un tested appliance, they are sold strictly for outdoor use or anywhere a permit isn’t required.
By purchasing from me at Benjineering you agree to the terms and conditions which can be found at the bottom of the website!
